Oct 22, 2008

Alcohol Inking Basics on Glossy Paper

Alcohol Inking Basics on Glossy Paper

In order to get really good results with the alcohol inks, I recommend you use the tools that Tim Holtz designed to use with them. Pictured here is the Inking Tool and a pack of Applicator Felt pieces (mini pads).

You will also need glossy paper for artists/crafters. Creative Play Stamps carries the paper by Ranger and the tools/inks as well. --You can't use glossy photo paper, btw - it doesn't work. And finally I highly recommend that you also use Blending Solution, although you don't have to. It just helps spread the ink out instead of leaving pure color blobs. It spreads the color out and blends them -- allowing them to meld together in a natural way.

The inking tool has a wood base and medium sized handle -just the right size to fit it your palm. On the bottom of the base is a strip of velcro that's permanently attached, so you can easily put on and/or take off your felt pad.

Simply place the piece of felt onto the the velcro.

It stays put with just the right amount of clinging. It won't fall off while you're using it, but it's easy to take off as well.


Next, choose your color of ink and gently squeeze. It's very easy to control the amount of ink that comes out - the bottle is designed with the artist in mind, and the needle-nose tip makes it even easier to control the flow of ink. I used the color *Meadow* in this example.

Lift up and repeat it again. Place around 4-7 drops on the pad, depending on how large of an area you need to cover.

Now add a few drops of Blending Solution on top of the color drops. (Using the Blending solution is optional, however if you don't use it all you'll get when you apply it to your project is exactly what you see on the felt pad - little drops of color - there will not be any spreading/blending going on.)

You can see how the color drops and Blending Solution have melded together on the pad.

Now pounce it onto the glossy paper.

Keep repeating until you have good coverage.

You can add another color if you want -- simply add a few drop to the felt. You don't need to use a new piece. I used *Ginger* for the 2nd color.

Just pounce away again.

And Voila! Now you have a wonderful new piece of paper! If you want to add another color, just repeat the step above. Add metallic mixatives to spice it up and give it a little tinge of metal!


Here is a LINK to a massive library of sample cards made using this technique. (From splitcoaststampers).

A SIDE NOTE *** I did the color in 2 steps, however you can do it in one step -- just put different color drops on the felt at the same time (however many you like, really) and then add the Blending solution and pounce away. The result will be similar.


There have been other methods for laying down the color, some people only pounce the blending solution onto the paper after the inks have been applied, and there are still yet other ways to do it.

Remember, the inks can be used on plastic, metal, glass, and other slick surfaces. The inks were not meant to be used on absorbant papers!

I will have a couple more examples in October. Stay tuned!!!

2 comments:

Juli Smith, said...

Wonderful tutorial Maxene - great job showing the step by step pics.

Juli Smith, said...

I forgot to add that I look forward to seeing your finished sample(s) using this technique.